ViGIE Transport Sensor · IATA approved

Complete visibility. Total peace of mind.

Real-time monitoring and live location tracking for the safe transport of medicines, vaccines, biological samples, embryos, reproductive cells, tissues and other cryopreserved materials, with a measuring range from -200 °C to +100 °C.

Live location · Instant alerts · Audit-ready reports
ViGIE platform journey map showing a shipment route from Lisbon to LondonViGIE platform temperature chart for a cryogenic shipment with warning and critical limits
The challenge

Once a shipment leaves your door, you lose sight of it

Embryos, vaccines, biologics and samples are at their most vulnerable in transit. Without real-time data, problems are only discovered on arrival, when it is too late to act.

Without ViGIE
  • Loss of visibility during transport
  • Temperature deviations and environmental risks
  • Delayed incident detection
  • Compliance and audit risks
→
With ViGIE
  • Real-time location tracking
  • Instant alerts for any deviation
  • Continuous monitoring of critical parameters
  • Full traceability and audit-ready reports
Monitored parameters

Six parameters. One logger.

Know not only where your shipment is, but the exact conditions it is travelling in, from departure to delivery.

°C

Temperature

From -200 °C to +100 °C with the external probe, and from -30 °C to +70 °C with the internal sensor: from cryogenic to refrigerated, frozen and room-temperature shipments.

%

Humidity

Protect humidity-sensitive products and materials along the route.

☀

Light

Detect light exposure during the journey.

⚡

Shock

Identify drops and impacts that may compromise the shipment.

↗

Tilt

Know if a container was tipped or handled incorrectly.

◎

Location

Follow every shipment on a live journey map in the ViGIE platform.

The ViGIE Transport Sensor

One sensor. Every detail in one platform.

Available with or without an external probe, the Transport Sensor sends conditions and location to the same ViGIE platform as your fixed sensors, on web and mobile app. No extra software, no separate logins.

  • Live journey map from departure to destination
  • Minimum, average and maximum values for every shipment
  • Warning and critical limits configured per shipment
  • Alarms routed to the right people, with configurable delays
ViGIE Transport Sensor with external probe for cryogenic shipments
With external probe · -200 °C to +100 °C
ViGIE Transport Sensor with START, STOP and STATUS buttons
Internal sensor · -30 °C to +70 °C
-200 °C
Measuring range from -200 °C to +100 °C with the external probe
10 min
Adjustable sampling, from every 10 minutes
IATA
Approved for air and road transport
How it works

From departure to audit in four steps

The logger travels with your shipment and reports to the same ViGIE platform you already use for your fixed sensors.

01

Start the logger

Place the logger with the shipment and press START. Recording begins immediately.

02

Track it live

Conditions and location are sent to the ViGIE platform every 10 to 120 minutes, as you configure.

03

Act on alerts

Any deviation triggers an instant alert by SMS, email, voice call or the ViGIE app, while the shipment is still on the way.

04

Prove and reuse

Get a complete, audit-ready record of every shipment. Recharge the logger and use it again.

FAQ

Frequently asked questions

Which data logger can monitor embryo and gamete shipments at -196 °C?

The ViGIE Transport Sensor monitors cryogenic shipments of embryos, reproductive cells and tissues down to -196 °C, with real-time location tracking. Any deviation triggers an instant alert, and the full journey is recorded for audit-ready traceability.

Is the ViGIE Transport Sensor IATA approved?

Yes. The ViGIE Transport Sensor is IATA approved, so it can travel with your shipments by air as well as by road.

Can I track the location of my shipment in real time?

Yes. The Transport Sensor provides live location tracking, so you always know where your shipment is and in what conditions. Location and environmental data appear in the same ViGIE platform, on web and mobile app, alongside your fixed sensors.

Which parameters does the Transport Sensor monitor?

Temperature, humidity, light, shock, tilt and location. Light, shock and tilt detection help identify exposure and incorrect handling during transport.

How often does the logger record and send data?

Sampling is adjustable from every 10 minutes, and data transmission can be configured every 10 to 120 minutes.

What happens if something goes wrong during transport?

ViGIE sends instant alerts for any deviation by SMS, email, voice call or the ViGIE app, so your team can act while the shipment is still on the way rather than after delivery.

Is the Transport Sensor reusable?

Yes. The logger has a rechargeable battery and can be reused shipment after shipment.

Can I prove transport conditions during an audit?

Yes. Every shipment has a complete record of conditions, location and alarms, with audit-ready reports that provide full traceability for inspections and quality audits.

Keep every shipment in sight

See the ViGIE Transport Sensor in action and find out how it fits your shipments, routes and compliance requirements.

×

Let’s talk about protecting what matters

Tell us a bit about your organization and our team will get back to you shortly.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.